HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

37
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
Running the backup extended BootWare segment
To bootstrap the Comware images with the backup extended BootWare segment, enter 5 in the
BASIC-BOOTWARE menu. For information about backing up the extended BootWare segment, see
"Managing the BootWare image."
Enter your choice(0-5): 5
Booting Backup Extended BootWare....
The Extended BootWare is self-decompressing.........Done.
Accessing the BASIC ASSISTANT menu
IMPORTANT:
Memory tests must be performed under the guidance of HP technical support engineers.
To access the BASIC ASSISTANT menu, press Ctrl+U while you are in the BASIC-BOOTWARE menu.
===========================<BASIC ASSISTANT MENU>===========================
|<1> RAM Test |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-1):
Table 14 BASIC ASSISTANT menu
Option
Task
<1> RAM Test
Perform a RAM test.
<0> Exit to Main Menu
Return to the BASIC-BOOTWARE menu.
To perform a RAM test, press Ctrl+T within 4 seconds after the prompt message "Press Ctrl+T to start
memory test" appears.
To perform a RAM pressure test, press Ctrl+V within 4 seconds after the prompt message "Press Ctrl+V
to start heavy memory test" appears.
Using the EXTENDED-BOOTWARE menu
To access the EXTENDED-BOOTWARE menu:
1. Reboot the device or run the primary or backup extended BootWare segment from the
BASIC-BOOTWARE menu.