HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

38
2. Press Ctrl+B within 5 seconds after the "Press Ctrl+B to access EXTENDED-BOOTWARE MENU..."
prompt message appears. If you fail to do this, the system starts decompressing the Comware
software file.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
3. Press Enter at the prompt for password.
The EXTENDED-BOOTWARE menu appears.
===========================<EXTENDED-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):
Availability of some options in this menu depends on the password recovery capability state
(displayed on top of the EXTENDED-BOOTWARE menu). For more information about the feature,
see "Disabling password recovery capability."
Table 15 EXTENDED-BOOTWARE menu options
Option
Tasks
Reference
<1> Boot System
Run the Comware software
without rebooting the device.
Choose this option after
completing operations in the
EXTENDED-BOOTWARE menu.
N/A
<2> Enter Serial SubMenu
Download files with XMODEM
and upgrade Comware
software through the console
port.
See "Upgrading Comware
software through the console port."
<3> Enter Ethernet SubMenu
Download files with FTP or TFTP
and upgrade Comware
software through the
management Ethernet interface.
See "Upgrading Comware
software through an Ethernet port."