HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

39
Option
Tasks
Reference
<4> File Control
 Display files on the current
storage medium.
 Set a Comware image file as
the main or backup startup
software image.
 Delete files to free storage
space.
See "Managing files."
<5> Restore to Factory Default
Configuration
Restore the factory-default
configuration.
This option is available only if
password recovery capability is
disabled.
See "Restoring the factory-default
configuration."
<6> Skip Current System
Configuration
Start the device with the
factory-default configuration
without loading any
configuration file.
This is a one-time operation and
takes effect only for the first
system startup or reboot after
you choose this option.
This option is available only if
password recovery capability is
enabled.
See "Starting up without loading
the configuration file."
<7> BootWare Operation
Menu
Back up, recover, and upgrade
the BootWare image.
See "Managing the BootWare
image."
<8> Skip Authentication for
Console Login
Skip console login
authentication.
This option is available only if
password recovery capability is
enabled.
See "Skipping console login
authentication."
<9> Storage Device Operation
Set the storage medium from
which the device will start up.
Set the storage medium where
file operations are performed.
This storage medium is referred
to as the "current storage
medium" in this chapter.
See "Managing storage media."
<0> Reboot
Reboot the device.
N/A
Disabling password recovery capability
Password recovery capability controls console user access to the device configuration and SDRAM from
BootWare menus.
If password recovery capability is enabled, console users can do the following:
 If console users forget their user privilege level passwords, they can skip the current configuration
file to configure new passwords.