HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

 If console users forget their console login passwords, they can skip login authentication or the

current configuration file to configure new passwords.

If password recovery capability is disabled, console users must restore the factory-default configuration

before they can configure new passwords. Restoring the factory-default configuration deletes the

next-startup configuration files.

To enhance system security, disable password recovery capability.

To disable password recovery capability:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Disable password recovery

capability.

undo password-recovery enable

By default, password

recovery capability is

enabled.

NOTE:

To avoid version compatibility problems, use compatible Comware software and BootWare.

Running the Comware software

To run the Comware software after completing all operations, enter 1 in the EXTENDED-BOOTWARE

menu.

Enter your choice(0-9): 1

Loading file flash:/12900-CMW710-SYSTEM-R1106.bin.......................

............................................................................

...................................................Done.

Loading file flash:/12900-CMW710-BOOT-R1106.bin.........................

............................................................................

...........................................Done.

Image file flash:/12900-CMW710-SYSTEM-R1106.bin is self-decompressing.....

............................................................................

...............Done.

System image is starting...

Waiting for StackBoard to insert, this process may occupy time up to 300 seconds

STM Init Start.

User interface aux1/1 is available.

Press ENTER to get started.