Manualshelf

HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8116fl Redundant Switch Fabric Module
51525354555657585960
41
Upgrading Comware software through the console port
You can upgrade the Comware software through the console port or modify the baud rate of the console
port from the Serial submenu.
To upgrade Comware software through the console port, enter 2 in the EXTENDED-BOOTWARE menu
to access the Serial submenu.
Enter your choice(0-9): 2
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Table 16 Serial submenu options
Option
Tasks
<1> Download Image Program To
SDRAM And Run
Load and run a Comware software image in SDRAM.
If password recovery capability is disabled, this option is not
available.
<2> Update Main Image File
Download a Comware software image to the current storage medium
as the main image (the file attribute is set to M).
If a main system image already exists, the M file attribute of the
original image is removed.
<3> Update Backup Image File
Download a Comware software image to the current storage medium
as the backup image (the file attribute is set to B).
If a backup system image already exists, the B file attribute of the
original image is removed.
<4> Modify Serial Interface Parameter
Change the baud rate of the console port.
The baud rate change is a one-time operation. The baud rate will
restore to the default (9600 bps) at reboot. To set up a console
session with the device after a reboot, you must change the baud rate
setting on the configuration terminal to 9600 bps.
<0> Exit To Main Menu
Return to the EXTENDED-BOOTWARE menu.
NOTE:
To set the current storage medium, see "Managing storage media."
Upgrading Comware software through an Ethernet port
You can upgrade Comware software with FTP or TFTP through an Ethernet port from the Ethernet
submenu.
To update Comware software through an Ethernet port from the Ethernet submenu: