HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

42
1. Enter 3 in the EXTENDED-BOOTWARE menu to access the Ethernet submenu.
Enter your choice(0-9):3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-4):
Table 17 Ethernet submenu options
Option
Tasks
<1> Download Image Program To SDRAM
And Run
Load and run a Comware software image in SDRAM.
If password recovery capability is disabled, this option is
not available.
<2> Update Main Image File
Download a Comware software image to the current
storage medium as the main image (the file attribute is
set to M).
If a main system image already exists, the M file attribute
of the original image is removed.
<3> Update Backup Image File
Download a Comware software image to the current
storage medium as the backup image (the file attribute is
set to B).
If a backup system image already exists, the B file
attribute of the original image is removed.
<4> Modify Ethernet Parameter
Configure FTP or TFTP file transfer settings.
<0> Exit To Main Menu
Return to the EXTENDED-BOOTWARE menu.
2. Enter 4 in the Ethernet submenu to configure file transfer settings.
Enter your choice(0-4):4
======================<CORE 0 ETHERNET PARAMETER SET>=======================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name : newest.ipe
:
Target File Name : newest.ipe
:
Server IP Address :192.168.0.23
Local IP Address :192.168.0.105
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0