Manualshelf

HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8116fl Redundant Switch Fabric Module
58596061626364656667
48
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Table 20 BootWare Operation menu options
Option
Tasks
<1> Backup Full BootWare
Back up the entire BootWare image. When the BootWare
image is corrupted, you could use the backup image for
recovery.
<2> Restore Full BootWare
Recover the entire BootWare image.
If the BootWare image has been corrupted, you can use a
backup BootWare image to recover it.
<3> Update BootWare By Serial
Update the BootWare from the console port.
<4> Update BootWare By Ethernet
Update the BootWare from an Ethernet port.
<0> Exit To Main Menu
Return to the EXTENDED-BOOTWARE menu.
Skipping console login authentication
IMPORTANT:
To perform this task, make sure password recovery capability is enabled. If the capability is disabled,
you cannot perform this task.
Skipping console login authentication applies only to console login users.
Skipping console login authentication is a one-time operation. It takes effective only for the first system
boot or reboot (option 1 and option 0 in the EXTENDED-BOOTWARE menu) after you perform the
operation. If you do not configure a new login password, the original setting continues to take effect for
the subsequent reboot.
If you do not remember the console login password, enter 8 in the EXTENDED-BOOTWARE menu to log
in to the device through the console port without login authentication.
Enter your choice(0-9): 8
Clear Image Password Success!
Managing storage media
To get information about available storage media, and set the storage medium you want to use for file
operations, enter 9 in the EXTENDED-BOOTWARE menu.
Enter your choice(0-9): 9
The following DEVICE CONTROL menu appears:
==============================<DEVICE CONTROL>==============================
|<1> Display All Available Nonvolatile Storage Device(s) |
|<2> Set The Operating Device |