Release Notes for H3C S7500E, Comware 5.20 Release 6305 Patch 02. Models: 0235A25N, 0235A27Q, 0235A27R, 0235A27S, 0235A29A, 0235A33R

Hangzhou H3C Technologies Co., Ltd.

H3C S7500E-CMW520-R6305P02 Release

Notes

2009-3-5 Page 26 of 29

Please set application file download protocol parameter:

1. Set TFTP protocol parameter

2. Set FTP protocol parameter

3. Set XMODEM protocol parameter

0. Return

Enter your choice(0-3):3

Step 2: Enter 3 in the download program menu. Select to implement the software

upgrading via Xmodem protocol. Press <Enter> and the screen will display the

following information:

Please select your download baudrate:

1. 9600

2. 19200

3. 38400

4. 57600

5. 115200

6. Exit

Enter your choice (0-5):

Step 3: Select the appropriate download speed based on the actual requirements. For

example, enter 5 to select the download speed as 115200bps. Press <Enter> and the

system will display the following information:

Download baudrate is 115200 bps. Please change the terminal's baudrate to

115200 bps, and select XMODEM protocol.

Press ENTER key when ready.

Step 4: Follow the above prompt and change the baud rate on the console terminal,

so that the baud rate is consistent with the selected download baud rate of the

software. After the baud rate setting at the console terminal is completed, disconnect

the terminal and reconnect it. Press <Enter> to start downloading, and the screen will

display the following information:

Are you sure to download file to flash? Yes or No(Y/N)y

Now please start transfer file with XMODEM protocol.

If you want to exit, Press <Ctrl+X>.

Downloading ... CCCCC

 Note:

After the terminal baud rate is modified, it is necessary to disconnect and then re-

connect the terminal emulation program to validate the new setting.