Release notes - H3C S7500-CMW310-R3234P03

Hangzhou H3C Technologies Co., Ltd.
H3C S7500-CMW310-R3234P03 Release
Notes
2011-8-17
Page 16 of 25
Description: If the peer device does not follow standard sending LACP packet large
than 128 bytes, S75 drop it. Change should be taken for cooperation.
2. LSOD07605
First Found-in Version: CMW310-E3228
Condition: apply rules on ten GE line card.
Description: can not apply above 256 rules. But ten-GE port can apply up to 1K rules.
6.9 Resolved Problems in CMW310-E3229
1. LSOD07446
First Found-in Version: CMW310-E3228
Condition: Get rid of VLAN 1 configuration on any port of one distributed line card.
Description: BPDU traffic from main board to this line card should be dropped, such
as Cluster packets, STP packets, etc. These services can not work.
2. LSOD07204
First Found-in Version: CMW310-E3228
Condition: display current-configuration of save configuration
Description: accounting module building configuration error message should be found
in log buffer
3. LSOD07464
First Found-in Version: CMW310-E3228
Condition: Enable IGSP, configure much static routing ports (at least 20). Open all
IGSP debugging s witch. Enable IGSP fast-leave on multicast member port, then
multicast member join and leave multicast group repeating. Let device print
debugging information.
Description: The MPM task should become exception and suspending.
4. LSOD07435
First Found-in Version: CMW310-E3228
Condition: “product product-name” command line
Description: product name key word should be S75xx, but it was showed as S65xx