Release notes - H3C S7500-CMW310-R3234P03

Hangzhou H3C Technologies Co., Ltd.
H3C S7500-CMW310-R3234P03 Release
Notes
2011-8-17
Page 19 of 25
Use TFTP protocol to upgrade through the Ethernet interface of the routing switch
unit;
Use FTP protocol to upgrade through the Ethernet interface of the routing switch unit;
Use XMODEM protocol to upgrade through the Console port of the routing switch unit.
Using Ethernet interface, the first two ways come in faster download. Setting user
name and password is necessary for FTP, so dos not TFTP.
The last one comes in slower download as it uses a serial interface.
8.1 Remote Upgrading through CLI
You may upgrade the application and Boot ROM program of a device remotely
through command line interface (CLI). To this end, telnet to the device from a
computer (at 10.10.110.1) running FTP Server first; and then FTP the application and
Boot ROM program, S 7500.app and srpubtm.app and lpubtm.app. for example, from
the FTP server as follows:
<H3C>ftp 10.10.110.1
Trying 10.10.110.1 ...
Connected to 10.10.110.1.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(10.10.110.1:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get S7500.app
[ftp] get srpubtm.app
[ftp] get lpubtm.app
[ftp] bye
MPU BootRom Upgrading:
<H3C> boot bootrom srpubtm.app slot 0
please wait ...
Bootrom is updated!
LPU BootRom Upgrading:
<H3C> boot bootrom lpubtm.app slot 3 （ Note that the slot number should
correspond to the slot where the board locates. ）
Host Program Upgrading:
<H3C> boot boot-loader primary S7500.app
<H3C>display boot-loader
The primary app to boot of board 0 at the next time is: flash:/S7500.app
The backup app to boot of board 0 at the next time is: flash:/ S7500.app
<H3C> reboot （ Make sure that you have saved other configurations before