Release notes - H3C S7500-CMW310-R3234P03

Hangzhou H3C Technologies Co., Ltd.
H3C S7500-CMW310-R3234P03 Release
Notes
2011-8-17
Page 20 of 25
restart）
Now you complete the host software and BootRom upgrade (The reboot command is
necessary to restart the switch).
 Note:
In case of inadequate Flash memory, you can delete some of the program files in
Flash, some host program that is no longer in use for example, after completing
Bootrom upgrading. Then FTP the host program to the switch for upgrading. Power
off is prohibited in the process of upgrading..
The following introduces the general methods that service personal uses for local
upgrading.
8.2 Boot Menu
After power on, H3C S7500 series LAN Switch runs BOOTROM at first. The terminal
displays as follows (The following takes S7506 Switch as an example):
******************************************
* *
* H3C S7506 BOOTROM, Version 530 *
* *
******************************************
Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
Creation date : Apr 2 2007, 19:21:43
CPU type : MPC8245
CPU Clock Speed : 300Mhz
BUS Clock Speed : 33Mhz
BOOT_FLASH type : AMD29LV040B
Flash Size : 32MB
Memory Size : 512MB
S7506 main board self testing................................
SDRAM Data lines Selftest.................................OK!
SDRAM Address lines Selftest..............................OK!
SDRAM fast selftest.......................................OK!
Please check LEDs.....................LEDs selftest finished!
CPLD selftest.............................................OK!
FPGA selftest.............................................OK!
The switch Mac address is .....................0000.0309.0004