Release notes - H3C S7500-CMW310-R3234P03

Hangzhou H3C Technologies Co., Ltd.
H3C S7500-CMW310-R3234P03 Release
Notes
2011-8-17
Page 22 of 25
Step 2: Enter 3 in the download program menu. Select to implement the software
upgrading via Xmodem protocol. Press <Enter> and the screen will display the
following information:
Please select your download baudrate:
1. 9600
2. 19200
3. 38400
4. 57600
5. 115200
6. Exit
Enter your choice (0-5):
Step 3: Select the appropriate download speed based on the actual requirement s. For
example, enter 5 to select the download speed as 115200bps. Press <Enter> and the
system will display the following information:
Download baudrate is 115200 bps. Please change the terminal's baudrate to
115200 bps, and select XMODEM protocol.
Press ENTER key when ready.
Step 4: Follow the above prompt and change the baud rate on the console terminal,
so that the baud rate is consistent with the selected download baud rate of the
software. After the baud rate setting at the console terminal is completed, disconnect
the terminal and reconnect it. Press <Enter> to start downloading, and t he screen will
display the following information:
Are you sure to download file to flash? Yes or No(Y/N)y
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Downloading ... CCCCC
 Note:
After the terminal baud rate is modified, it is necessary to disconnect and then re -
connect the terminal emulation program to validate the new setting.
Step 5: Select [Transfer\Send File] from the terminal window. Click <Browse> in the
pop-up window and select the software to be downloaded. Change the protocol name
to Xmodem.
Step 6: Click <Send> button.
Step 7: After the downloading of the program is completed, the screen will display the
following information: