H3C S7500E-CMW520-R6616P05 Release Notes
H3C S7500E-CMW520-R6616P05
H3C S7500E-CMW520-R6616P05 Release Notes H3C S7500E-CMW520-R6616P05 Release Notes Keywords S7500E, open problems and workarounds, resolved problems, restrictions and cautions Abstract This release notes describes the S7500E-CMW520-R6616P05 release with respect to software features, open problems and workarounds, unresolved and solved problems, and software upgrade.
H3C S7500E-CMW520-R6616P05 Release Notes Table of Contents Version information ·············································································································································································4 Version Number···········································································································································································4 Version History ······················································
H3C S7500E-CMW520-R6616P05 Release Notes List of Tables Table 1 Version history ...................................................................................................................... 4 Table 2 Hardware and software compatibility matrix ............................................................................ 4 Table 3 ISSU Compatibility matrix....................................................................................................... 6 Table 4 Hardware features................
H3C S7500E-CMW520-R6616P05 Release Notes Version information Version Number Comware Software, Version 5.20, Release 6616P05 Note: You can use the dis play vers ion command in any view to view version information. See Note ①.
H3C S7500E-CMW520-R6616P05 Release Notes Item Specifications iMC MVM 5.0 (E0101) iMC NTA 5.0 (E0101) iMC PLAT 5.0 (E0101) + L01 iMC QoSM 5.0 (E0101) iMC UAM 5.0 (E0101) iMC UBA 5.0 (E0101) iNode iNode PC 5.
H3C S7500E-CMW520-R6616P05 Release Notes Slot 2 Without Board LPU 3: Uptime is 0 weeks,0 days,8 hours,18 minutes H3C S7503E LPU with 1 BCM1122 Processor BOARD TYPE: LSQ1GV48SC DRAM: 512M bytes FLASH: 0M bytes NVRAM: 0K bytes PCB 1 Version: VER.
H3C S7500E-CMW520-R6616P05 Release Notes Restrictions and Cautions 1. If you perform powered device (PD) detection on a PoE-enabled port connected to a non-PD device such as a PC, the detection status of the port is incorrect, and PoE does not work. 2. The switch does not support configuring ip-subnet-vlan on a per-port basis. 3. The protocol-based VLAN feature does not support AppleTalk. 4. A VLAN-based QoS policy does not take effect on a QinQ p ort. 5.
H3C S7500E-CMW520-R6616P05 Release Notes 20. When you change the switch-mode of an EB/SD card from normal to non-normal, or upgrade the card in non-normal mode for the first time, the card automatically reboots 1 or 2 times, which needs 10 to 20 minutes. This p rocess is normal. 21. Do not configure the device through the web interface. Web management is not ready f or release yet. Feature List Hardware Features Table 4 Hardware features Category Description 175mm x 436mm x 420 mm (6.89 × 17.17 ×16.
H3C S7500E-CMW520-R6616P05 Release Notes Category Description LSQ1TGX2SC -- 2-port 10G Ethernet optical interface card (XFP,LC) LSQ1GP12EA -- 12-port 1000M Ethernet optical interface card (SFP, LC) LSQ1GP24SC -- 24-port 1000M Ethernet optical interface card (SFP, LC) LSQ1GT24SC -- 24-port 1000M Ethernet electrical interface card (RJ45) LSQ1GP48SC -- 48-port 1000M Ethernet optical interface card (SFP,LC) LSQ1TGX1EA -- 1-port 10G Ethernet optical interface card (XFP,LC) LSQ1T24XGSC -- 24 1000M Ethernet elec
H3C S7500E-CMW520-R6616P05 Release Notes Category Description XFP-SX-MM850XFP-SX-MM850 300m (0.19 mile) XFP-LX-SM1310 10km (6.21 miles) XFP-LH40-SM1550 40km (24.86 miles) XFP-LH80-SM1550 80km (49.71 miles) SFP-GE-SX-MM850-A 550m/275m (0.34/0.17 mile) SFP-GE-LX-SM1310-A 10km (6.21 miles) SFP-GE-LH40-SM1310 40km (24.86 miles) SFP-GE-LH40-SM1550 40km (24.86 miles) SFP-GE-LH70-SM1550 70km (43.50 miles) SFP-GE-LH100-SM1550 100km (462.14 miles) SFP-GE-T 100m (0.
H3C S7500E-CMW520-R6616P05 Release Notes Software Features Table 5 Software features Feature Description Ethernet II IEEE 802.3/802.2 SNAP IEEE 802.3/802.2 Long Frame (1518-1536) Jumbo Frame (1536-9216) VLAN (Port-based VLAN/Subnet-based VLAN/Protocol-based VLAN/MAC-based VLAN) IEEE 802.1Q Layer-2 IEEE 802.1p RSTP (802.1w) MSTP (802.1s) LACP (802.
H3C S7500E-CMW520-R6616P05 Release Notes Feature Description IPv4 routing: Static route management RIP OSPF BGP IS-IS Routing Policy based routing (PBR) IPv6 routing: IPv6 static route management RIPng OSPFv3 BGP+ IS-ISv6 IGMP snooping IGMP MLD snooping MLD Multicast PIM-DM PIM-SM PIM-SSM BIDIR-PIM MSDP Remark 802.1p, DSCP, IP precedence, or local precedence by ACL Map to output queue by 802.
H3C S7500E-CMW520-R6616P05 Release Notes Feature Description SNMP v1/v2/v3 RMON Management Public MIBs Private MIBs Syslog/Debug iMC network management CLI Local management Device file management Auto configuration Dual-image Console login AUX login Login Telnet (VTY) login SSH login FTP login XMODEM login Ping DNS client DHCP Server DHCP Client DHCP Relay Applications DHCP snooping Telnet FTP Client FTP Server TFTP Client NTP Client/Server VRRP Reliability Dual-fabric IRF ISSU RADIUS TACACS+ A
H3C S7500E-CMW520-R6616P05 Release Notes Feature Description MPLS MPLS LDP MPLS L3VPN MPLS L2VPN 4 EPON ports + 8GE ports line card 8 EPON ports + 8GE ports line card 16 EPON ports + 8GE ports line card 802.
H3C S7500E-CMW520-R6616P05 Release Notes Version Number Item Description Deleted features: None Modified features: None New features: None Hardware feature updates New boards: None Deleted features: None S7500E-CMW520-R66 16 New features: Software feature updates BIDIR-PIM Deleted features: None Modified features: None New features: None Hardware feature updates New boards: None Deleted features: None S7500E-CMW520-F66 15 New features: Software feature updates Global Static IP Source Guard Bind
H3C S7500E-CMW520-R6616P05 Release Notes Version Number S7500E-CMW520-R66 16P01 S7500E-CMW520-R66 16 S7500E-CMW520-F66 15 S7500E-CMW520-R66 13 S7500E-CMW520-E66 12P01 Item Description Modified commands None New commands None Deleted commands None Modified commands None New commands Add shutdown command in port group view Deleted commands None Modified commands None New commands See the feature manual.
H3C S7500E-CMW520-R6616P05 Release Notes Open Problems and Workarounds LSD51219 First found-in version: CMW520-E6612 Description: In 7510 chassis, if LSQ1SPRD board and LSQ1TGX8SD (or LSQ1TGS8SC) board are configured together, sometimes the VPLS packets can’t be transmitted. Workaround: None. LSD59702 First found-in version: CMW520-E6612 Description: Q-Bridge MIB Port list is incorrectly populated. Workaround: None. It will be fixed in future.
H3C S7500E-CMW520-R6616P05 Release Notes Description: Sometimes GRE packets are dropped by device with secblade ACG board. Workaround: None. It has been fixed in F6618L08. LSD53669 First found-in version: CMW520-E6612 Description: When there is an ARP entry for each VPN instance, if the ARP entry is deleted in original VPN instance, the copy of the ARP entry will not be deleted in other VPN instances. Then customers can not visit across VPN instances after ARP entry is changed to new interface.
H3C S7500E-CMW520-R6616P05 Release Notes Description: EA board can not transmit OSPF hello packets, and cause that other devices can not build OSPF neighbors across EA boards. LSD58787 First found-in version: CMW520-E6612 Description: More CF card types are supported CMW520 -F6618L08. LSD57547 First found-in version: CMW520-R6616 Description: If there are two SA or SC cards with 48 ports in 7506E-S chassis, sometimes IRF stack can’t build successfully.
H3C S7500E-CMW520-R6616P05 Release Notes CMW520-R6616 LSD49278 First found-in version: CMW520-E6612 Description: Batch shutdown and undo shutdown operations are not supported. LSD50343 First found-in version: CMW520-E6612 Description: Voice VLAN does not support enough OUI M AC addresses. (In CMW520 -R6616, voice VLAN supports 128 OUI M AC addresses) LSD49124 First found-in version: CMW520-E6612 Description: The MA/MD naming format does not support enou gh special characters.
H3C S7500E-CMW520-R6616P05 Release Notes LSD51323 First found-in version: CMW520-E6612P01 Description: In IRF environment, after the master or slave board was pull out, sometimes the stack connection failed. LSD48850 First found-in version: CMW520-E6612P01 Description: When LSQ1TGX8SD was configured as proxy board, sometime the packet forwarding was block. LSD49025 First found-in version: CMW520-E6612P01 Description: After switchover with secblade ACG board, the switch may reb oot abnormally.
H3C S7500E-CMW520-R6616P05 Release Notes Software Upgrade Files Used for Upgrade Boot files Boot files are used at switch sta rtup. The S7500E series support two b oot files: Main boot file: The default boot file a switch uses for startup. Backup boot file: The boot file a switch uses for startup when the ma in boot file is invalid. Patch files Patch files are released to fix software defects. A patch file may contain one or more patches (or called patch units).
H3C S7500E-CMW520-R6616P05 Release Notes You can conf igure Intelligent Resilient Framework (IRF) features on two S7500E series switches and connect them together to form a distributed IRF virtual device. Upgrading a Standalone Switch Upgrade prerequisites # Telnet to the switch or log in through the console port. # Display device information. display device Slot No.
H3C S7500E-CMW520-R6616P05 Release Notes Deleting a file permanently will take a long time. Please wait... %Delete file flash:/switch001.app...Done. On the standby main b oard delete /unreserved slot1#flash:/switch001.app The content cannot be restored!!! Delete slot1#flash:/switch001.app?[Y/N]:y Deleting a file permanently will take a long time. Ple ase wait... %Delete file slot1#flash:/switch001.app...Done.
H3C S7500E-CMW520-R6616P05 Release Notes 221 Server closing. 3. Copy the .app file to the standby main b oard of the switch. # Copy the file newes t.app to the root directory of the storage medium on the standby main board in slot 1. copy newest.app slot1#flash:/ Copy flash:/newest.app to slot1#flash:/newest.app?[Y/N]:y %Copy file flash:/newest.app to slot1#flash:/newest.app...Done. NOTE: You can configure the switch as the FTP server, FTP client, or TFTP client.
H3C S7500E-CMW520-R6616P05 Release Notes the H3C S7500E Series Ethernet Switches Command Reference. Install patches 2. # Download the patch files to the root directory of the storage medium of the active ma in board and that of the standby main board, and then install the patch files with the patch ins tall command. system-view [Sysname] patch install flash: Patches will be installed. Continue? [Y/N]:y Do you want to continue running patches after reboot? [Y/N]:y Installing patches........
H3C S7500E-CMW520-R6616P05 Release Notes Directory of flash:/ 0 -rw- 3597 Sep 01 2009 18:35:28 startup.cfg 1 -rw- 6625 Jun 02 2010 16:50:51 switch.cfg 2 -rw- 27475851 Aug 11 2010 11:04:20 switch001.app 3 -rw- 31782388 Jul 23 2010 09:25:21 switch002.app 64389 KB total (5636 KB free) On the standby main b oard in slot 1 of member device 1 dir chassis1#slot1#flash:/ Directory of chassis1#slot1#flash:/ 0 -rw- 3597 Sep 01 2009 18:35:28 startup.
H3C S7500E-CMW520-R6616P05 Release Notes The delete /unres erved file-url command deletes a file permanently and the action cannot be undone. The delete file-url command moves a file to the recycle bin and the file still occupies storage space. To permanently delete the file from the recycle bin, execute the res et recycle-bin command in the directory where the file is orig inally located. Download the .app file to the switch Download the .
H3C S7500E-CMW520-R6616P05 Release Notes copy newest.app chassis2#slot0#flash:/ Copy flash:/newest.app to chassis2#slot0#flash:/newest.app?[Y/N]:y %Copy file flash:/newest.app to chassis2#slot0#flash:/newest.app...Done. On the standby main b oard in slot 1 of member device 2 copy newest.app chassis2#slot1#flash:/ Copy flash:/newest.app to chassis2#slot1#flash:/newest.app?[Y/N]:y %Copy file flash:/newest.app to chassis2#slot1#flash:/newest.app...Done.
H3C S7500E-CMW520-R6616P05 Release Notes This command will set the boot file of the specified board. Continue? [Y/N]:y The specified file will be used as the main boot file at the next reboot on chassis 2 slot 1! # Reboot the switch to make the new boot files effective. reboot Start to check configuration with next startup configuration file, please wait. ........DONE! This command will reboot the device.
H3C S7500E-CMW520-R6616P05 Release Notes * * **************************************************************** Creation Date : Aug CPU Type : BCM1125H CPU L1 Cache CPU Clock Speed 9 2010 : 32KB : 600MHz Memory Type : DDR SDRAM Memory Size : 512MB Memory Speed : 133MHz BootRom Size : 512KB Flash Size : 64MB CPLD Version : 006 PCB Version : Ver.B Mac Address : 0023895F954F Press Ctrl+B to enter Boot Menu...
H3C S7500E-CMW520-R6616P05 Release Notes NOTE: Skip this section if the new boot file already exists on your switch. 1. Using TFTP through the management Ethernet port Step1 Connect the management Ethernet port of the switch to the PC that stores the target .app file (the IP address of the PC is required), and connect the console port of the switch to the same or another PC. Step2 Run the TFTP server program on the PC connected to the management Ethernet port and specify the file storage directory.
H3C S7500E-CMW520-R6616P05 Release Notes ............................................................................... ..........................done! The attribute of old.app is changed from main to none! done! 1. Set TFTP protocol parameters 2. Set FTP protocol parameters 3. Set XMODEM protocol parameters 0. Return to boot menu Enter your choice(0-3): 0 Step7 Type 0 to retu rn to the boot menu. After the .app file is successfully downloaded, set the file as the main or backup boot file .
H3C S7500E-CMW520-R6616P05 Release Notes NOTE: The switch must be on the same network segment with the PC storing the upgrade files. Step12 Set the FTP parameters. The following output appears: Are you sure to download file to flash? Yes or No (Y/N): y Step13 Answer Y to the question. The switch starts to download the file and write it to the flash memory. When the process is complete, you can see the following: Loading........................................................................ .............
H3C S7500E-CMW520-R6616P05 Release Notes 2. Set FTP protocol parameters 3. Set XMODEM protocol parameters 0. Return to boot menu Enter your choice(0-3): 3 Load File name :update.app The name of the file to be dow nloaded Step18 Type the file name and the download baud rate menu appears. Please select your download baudrate: 1.*9600 2. 19200 3. 38400 4. 57600 5. 115200 0. Exit Enter your choice (0-5):2 Step19 Select an appropriate download baud rate. For example, type 2 to select 19200 bps.
H3C S7500E-CMW520-R6616P05 Release Notes Figure 1 The Switch Properties dialog box Hangzhou H3C Technologies Co., Ltd.
H3C S7500E-CMW520-R6616P05 Release Notes Figure 2 The console port properties dialog box Step8 Click Connect to re-connect to the switch. The following output appears: Now please start transfer file with XMOD EM protocol. If you want to exit, Press Downloading ...CCCCCCCCCCCCCCC Step9 Select Trans fer > Send File in the HyperTerminal window. In the Send File d ialog box that appears, click Brows e to select the target .app file, and select Xmodem as the protocol.
H3C S7500E-CMW520-R6616P05 Release Notes Figure 4 The Xmodem file s end for Switch dialog box Step11 When the file is successfully downloaded, you can see the following: Loading ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC.done ! Free flash Space : 65932288 bytes Writing flash...
H3C S7500E-CMW520-R6616P05 Release Notes Set new main and backup boot files After you download a new boot file to the switch, set the file as the main or backup boot file. The switch uses the main boot file in normal cases, and uses the backup boot file when the main boot f ile is invalid. Follow these steps to set the new main and backup boot files: Step1 In the boot menu, type 2 to enter the boot file menu. Flash:/ Number.
H3C S7500E-CMW520-R6616P05 Release Notes ...................................................................... done!OK System is starting... The following might occur at the switch startup: 1. The switch starts up with the ma in boot file. 2. The main boot file is faulty and the switch starts up with the backup boot file. 3. Both the main and backup boot files are faulty and the switch picks a random boot file and starts up with it. 4.
H3C S7500E-CMW520-R6616P05 Release Notes 3(-). 17434703 s7500e -v6r1b2d038sp03_gzq.app 4. 361600 1122btm109.app 5. 458368 1125btm201.app 6. 354 7. config.cfg 361792 1122btm108.app Flash Free Space : 19034112 bytes CF:/ No. File Size Date Time File Name ============================================================= 8. 24115807 2002-03-04 15:58:40 S7500E-V6R1B2D035T06.app Free CF card space : 39317504 bytes. The current application file is: flash:/S7500E-V6R2B1D039.
