Release notes - H3C S9500-CMW310-R1652P03

Hangzhou H3C Technologies Co., Ltd.
H3C S9500-CMW310-R1652P03
Release Notes
2010-9-27 Page 39 of 56
200 PORT command okay
150 "C:\ LSBSRP1N01303.APP" file ready to send (326896 bytes) in ASCII
mode
226 Transfer finished successfully.
FTP: 326896 byte(s) received in 3.724 second(s) 87.72K byte(s)/sec.
[ftp]bye
221 Windows FTP Server (WFTPD, by Texas Imperial Software) says goodbye
Caution:
If the Flash memory space is insufficient, proceed as follows:
1. If the MPU has no CF card, upgrade the BootROM first and then remove part of
program files in the Flash memory (it is recommended to remove some unused host
program files). After that, FTP the new host program to the Flash memory of the
switch, and then finish the host program upgrade.
2. If the MPU has CF card, FTP the host program and BootROM to the CF card of the
switch, and then finish the upgrade for the BootROM and host program.
8.1.2 Upgrade MPU BootROM
Both the master MPU BootROM and the slave MPU BootROM need to be upgraded.
Suppose that slot 0 holds the master MPU and slot 1 holds the slave MPU.
<H3C> boot bootrom LSBSRP1N01303.APP slot 0
This will update BootRom file on board 0 . Continue? [Y/N] y
Board 0 upgrading BOOTROM, please wait...
Upgrade board 0 BOOTROM succeeded!
<H3C> boot bootrom LSBSRP1N01303.APP slot 1
This will update BootRom file on board 1 . Continue? [Y/N] y
Board 1 is upgrading BOOTROM, please wait...
Upgrade board 1 BOOTROM succeeded!