Release notes - H3C S9500-CMW310-R1652P03

Hangzhou H3C Technologies Co., Ltd.
H3C S9500-CMW310-R1652P03
Release Notes
2010-9-27 Page 41 of 56
Caution:
L3PLUS boards include three types: NATB, VPNB and NAMB. Before upgrade, you
need to download the program file LSBLMCUF02303.APP. In the process of
upgrading the BootROM, it is not allowed to power off the switch or the board being
upgraded; otherwise the board will fail to reboot.
8.1.5 Upgrade Host Program
Specify the new downloaded program as the host program of the MPU:
<H3C> boot boot-loader primary flash:/S9500-CMW310-R1652P03-SI.APP
The specified file will be booted next time!
If the device has double MPU, you need to copy the host program to the slave MPU
and specify the new downloaded program as the host program of the slave MPU:
<H3C> copy S9500-CMW310-R1652P03-SI.APP slot1#flash:/S9500-RP310-R1652P03-
SI.APP
<H3C> boot boot-loader primary slot1#flash:/S9500-CMW310-R1652P03-SI.APP
slot 1
8.1.6 Upgrade L3PLUS Host Program
L3PLUS boards including NATB, VPNB and NAMB boards. To upgrade the host
program of L3PLUS boards, it is required to use specific command to download the
host program to the memory if the MPU Flash memory cannot provide sufficient
space to store the host program.
1. If there is CF card or enough Flash memory
The host program issued with the L3PLUS board includes S9500-CMW310-
R1652P03-SI.APP and S9500-CMW310-R1652P03-EI.APP. You can set the latter
one as the startup program of the MPU for next startup. The L3PLUS board can be
upgraded as ordinary interface boards. For detailed information about MPU host
program upgrade, refer to the previous sections.
2. If there is not enough space in the Flash memory
Upgrade the host program of the MPU with S9500-CMW310-R1652P03-SI.APP, and
then restart the frame. After the system startup, the L3PLUS board cannot start. In