Release notes - H3C S9500-CMW310-R1652P03

Hangzhou H3C Technologies Co., Ltd.
H3C S9500-CMW310-R1652P03
Release Notes
2010-9-27 Page 45 of 56
3. Download file to CF card through serial interface
4. Modify serial interface boot parameter
0. Return to main menu
To set the baudrate of the serial port, choose <4> and enter the following menu to
select the corresponding rate:
Enter your choice(0-4): 4
1: 9600(default)
2: 19200
3: 38400
4: 57600
5: 115200
please select an appropriate baudrate:
Enter your choice(1-5): 5
BaudRate is 115200 bps. Please change the terminal's speed to 115200 bps
Return to the serial port submenu after the setting. Choose <2> to download the
program file to Flash memory. Select the program file to be downloaded and
XMODEM protocol on HyperTerminal. Then begin to download the program file:
SERIAL SUBMENU
1. Download file to SDRAM through serial interface and boot
2. Download file to Flash through serial interface
3. Download file to CF card through serial interface
4. Modify serial interface boot parameter
0. Return to main menu
Enter your choice(0-4): 2
Please Select File .
XMODEM downloading ...CC download successfully!
Free flash Space : 15862784 bytes
Writing
Flash.....................................................................
.........................................................Done
3. Upgrade BootROM
Press Ctrl+U in the main menu of MPU BootROM. Choose and confirm the number of
the file to be upgraded. Then system starts to upgrade the BootROM :
MAIN MENU