Release notes - H3C S9500-CMW310-R1652P03

Hangzhou H3C Technologies Co., Ltd.
H3C S9500-CMW310-R1652P03
Release Notes
2010-9-27 Page 52 of 56
Write flash...OK!
Verify...OK!
Update successfully!
3. Reboot the L3PLUS board
Reboot the L3PLUS board after loading. The new BootROM comes into effect.
MAIN MENU
1. Boot from SRPU
2. Boot from FTP
3. Boot from flash
4. Load program to flash
5. Modify boot parameter
6. Write FA EEPROM
7. Erase flash
0. Reboot
Enter your choice(0-6): 0
Rebooting...
Caution:
L3PLUS service boards include three types: NATB, VPNB and NAMB. In the process
of upgrading the BootROM, it is not allowed to power off the switch or the board being
upgraded; otherwise the board will fail to reboot.
8.2.4 Upgrade Host Program
1. Download host program file
The process of downloading host program file is just the same as that of downloading
MPU BootROM program files. (Be sure to save configuration referring to 8.3 Upgrade
Configuration Files before rebooting the switch, as it may cause lose of
configurations).
2. Change booting mode and booting file
Choose <6> in the main menu and set booting mode and booting file: