Release notes - H3C S9500-CMW310-R1652P03

Hangzhou H3C Technologies Co., Ltd.
H3C S9500-CMW310-R1652P03
Release Notes
2010-9-27 Page 54 of 56
The current application file is :S9500-CMW310-R1652P03-SI.APP
Free Space : 360736 bytes
Choose <6> to display the list of files in the CF card:
Enter your choice(0-8): 6
Initialize CF card...done
No. File Size Date Time File Name
=================================================================
1. 265320 2004-12-22 14:03:46 mpubtout.app
Free CF card space : 255823872 bytes.
3. Reboot the MPU
Reboot the MPU. The new host program comes into effect.
8.3 Upgrade Configuration File
8.3.1 Upgrading from 12XX
Confirm the current version. If the current version is 12XX, such as 1271, you may
only need to save the configuration by using the following commands:
<H3C> save
The configuration will be written to the device.
Are you sure?[Y/N]y
Now saving current configuration to the device.
Saving configuration flash:/vrpcfg.cfg. Please wait...
Configuration is saved to flash memory successfully.
8.3.2 Upgrading for NATB
On version 12XX, it is not necessary to configure QACL redirection for NAT
outbound/NAT server. After the version is upgraded to 16XX, it is necessary to
configure the QACL to redirect NAT-converted packets to NAT board on incoming
interface at the private network side.
1） [H3C-GigabitEthernet4/1/1] Traffic-redirect inbound ip-group 3010 rule 1 link-
group 4000 rule 1 slot 2 designated-vlan 301