Release Notes - HP A7500-CMW520-R6626

Hewlett-Packard Development Company, L.P. 24
Board has finished loading file on Chassis 0 Slot 4.
Start accessing bootflash chip...
Bootrom update succeeded in slot 4.
# Reboot the switch to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
NOTE:
The Boot ROM image stored on the active MPU can be used to upgrade both the active MPU and LPUs,
while that stored on the standby MPU is used to upgrade the standby MPU only.
2. Upgrade system software
# Specify the file newest.app as the main system software image to be used at the next startup of the
active MPU.
<Sysname> boot-loader file flash:/newest.app slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 0!
# Specify the file newest.app as the main system software image to be used at the next startup of the
standby MPU.
<Sysname> boot-loader file slot1#flash:/newest.app slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
# Reboot the switch to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
CAUTION:
• To prevent configuration loss, save the latest configuration changes before you reboot the switch.
• System software images must be saved in the root directory of the storage medium. You can copy or
move system software images to the root directory. For more information about the boot-loader
command, see
Fundamentals Command Reference in the HP A7500 Switch Series Command
References
.
3. Install patches
# Download the patch files to the root directory of the storage medium of the active MPU and that of the
standby MPU, and then install the patch files with the patch install command.
<Sysname> system-view
[Sysname] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
Installation completed, and patches will continue to run after reboot.