Switch 7700 V2.00 Release Notes

UPGRADING APPLICATIONS

4. Press Enter. The system enters the download rate-setting menu:

Please select your download baudrate:

1. 9600

2. 19200

3. 38400

4. 57600

5. 115200

0. Exit

Enter your choice (0-5):5

5. Select the appropriate download speed. For example, enter 5 to select the download

speed as 115200bps.

6. Press Enter. The terminal displays the following information:

Download baudrate is 115200 bps. Please change the terminal’s baudrate to

115200 bps, and select XMODEM protocol.

Press enter key when ready.

7. Change the baud rate set at the configuration terminal, so that the baud rate is consistent

with the selected download baud rate of the software.

8. After the baud rate setting at the configuration terminal is completed, disconnect the

terminal and reconnect it.

9. Press Enter to start downloading. The terminal displays the following information:

Now please start transfer file with XMODEM protocol.

If you want to exit, Press <Ctrl+X>.

Waiting ... CCCCC

Note: After the terminal baud rate is modified, you must disconnect and then re-connect the

terminal emulator, to enable the new setting.

10. Select [Transfer\Send File] from the terminal window.

11. Click Browse in the Send file dialog box, shown in Figure 1 and select the application you

want to download.

12. Change the protocol name for the download to Xmodem.

Figure 1 Send File dialog box

13. Click Send. The dialog box shown in Figure 2 displays.