HP J9708A zl FIPS Chassis 10K-Rack Shelf-Kit Installation

7. Install the switch onto the shelf. Ensure each

hold-down bracket is inserted into the retention brace on

shelf.

7. Installez le commutateur sur l'étagère. Assurez-vous

que chaque support de fixation- est bien inséré dans

l'encoche de maintien sur l'étagère.

7. Instale o switch na prateleira. Certifique-se de que o

suporte de-pressão esteja inserido na braçadeira de

retenção da prateleira.

8. Secure the switch and its brackets to the front of the

rack using the rack screws and cage nuts supplied with

your rack.

8. Fixez le commutateur et ses supports sur l'avant du

rack à l'aide des vis et des écrous à cage fournis avec votre

rack.

8. Prenda o switch e seus suportes à parte frontal do rack

usando os parafusos do rack e as porcas fornecidos com

o rack.

Printed in Singapore

January 2012

Part Number: 5998-2536

*5998-2536*

The information contained herein is subject to change without notice.

5998-2536_10K-Rack-Kit.fm Page 4 Wednesday, January 4, 2012 3:21 PM