Installation Guide for fl Modules 2007-02

ProCurve Switch fl Modules

Module Module Type and Description

Status LED

Link and

Activity LEDs

Transceiver

slot cover

ProCurve Switch fl 2-Port X2 10GbE Module (J8737A)

Transceiver slot. The X2 10GbE module supports the

following transceivers (as of this printing)*:

• 10 Gigabit-X2-SC SR Optic transceiver (J8436A)

• 10 Gigabit-X2-SC LR Optic transceiver (J8437A)

• 10 Gigabit-X2-SC ER Optic transceiver (J8438A)

• 10 Gigabit-X2-CX4 Copper transceiver (J8440A)

– 10 Gigabit-X2-CX4 Optical Media Converter

(J8439A).

Activity, Link, and Status LEDs. See Table 3 on page 20

for information on interface module LEDs.

* For the latest information on supported transceivers,

visit the ProCurve Networking Web site:

www.procurve.com.

Interface Module Features

The ProCurve Switch 8100fl interface modules have the following features:

■ Module LEDs provide information about the link status and network

activity on each port.

■ Hot swapping modules—you can insert a new module or replace an

existing module while the switch is operating. It is not necessary to shut

down the switch.

■ Hot swapping mini-GBICs—you can install new and replace existing

mini-GBICs used in the 10-Port Mini-GBIC Interface Module (J8735A)

while the switch is operating. It is not necessary to shut down the switch.

■ Hot swapping transceivers—you can install new and replace existing

transceivers used in the X2 10GbE Interface Modules (J8736A and J8737A)

while the switch is operating. It is not necessary to shut down the switch.

■ Standards supported:

• The port on the 1-Port 10 GbE LR Interface Module is compatible with

the IEEE 802.3ae wavelength standard.

• The 10-Port 100/1000-T Interface Module is compatible with the IEEE

802.3 1000Base-T and IEEE 802.3u 100Base-TX industry standards.