Installation Guide for fl Modules 2007-02

ProCurve Switch fl Modules

For the ProCurve Switch 8100fl Series

ProCurve Switch fl modules are components used in the ProCurve 8100fl

Switch Series (Switch 8108fl and Switch 8116fl) to provide a variety of

network connectivity options. Each module is shipped separately from the

chassis. The different types of modules are described in this chapter.

As of this printing, the following modules are supported in ProCurve 8100fl

switches:

■ ProCurve 8108fl Redundant Switch Fabric Module (J8729A)

■ ProCurve 8116fl Redundant Switch Fabric Module (J8730A)

■ ProCurve Switch fl Redundant Management Module (J8731A)

■ ProCurve Switch fl 1-Port 10-GbE LR Interface Module (J8733A)*

■ ProCurve Switch fl 10-Port 100/1000-T Interface Module (J8734A)

■ ProCurve Switch fl 10-Port Mini-GBIC Interface Module (J8735A)

■ ProCurve Switch fl 1-Port X2 10-GbE Interface Module (J8736A)**

■ ProCurve Switch fl 2-Port X2 10-GbE Interface Module (J8737A)

* Discontinued in Summer 2006.

** Discontinued in Spring 2007. Replaced by the 2-Port X2 10Gbe Module

(J8737A).

Ordering ProCurve Switch fl modules. Contact your ProCurve

Networking Sales and Service Office or authorized dealer for information on

availability of other fl modules and supported ProCurve mini-GBICs and

transceivers. You can also visit the ProCurve Networking Web site

www.procurve.com to get more information.

Caution To avoid damaging modules and the backplane, be sure that you insert the

right type of module into the appropriate slot (see the illustration on page 9).

If you attempt to install a module in the wrong slot, physical keying prevents

the module from fully entering into the slot.