3Com Switch 8800 Advanced Software V5 Configuration Guide

1036 CHAPTER 80: FILE SYSTEM MANAGEMENT CONFIGURATION
n
■ Before restoring a configuration file, you should ensure that the server is
reachable, the server is enabled with TFTP service, and the client has permission
to read and write.
■ After the command is successfully executed, you can use the display startup
command (in user view) to verify if the filename of the startup configuration
file is the same with the filename argument, and use the dir command to verify
if the restored file exists.
Displaying and
Maintaining Device
Configuration
n
■ Configuration files are displayed in the same format in which they are saved.
■ The support for the optional arguments in both the display this and display
current-configuration command varies with devices. For detailed description
of this command, refer to the Switch 8800 Command Reference Guide.
To do... Use the command... Remarks
Display the configuration file
saved in the storage device
display
saved-configuration [
by-linenum ]
Available in any view
Display the configuration file
used for this and next startup
display startup Available in any view
Display the validated
configuration in current view
display this Available in any view
Display current configuration display
current-configuration [
interface [ interface-type [
interface-number ] ] |
configuration [ configuration
] | [ by-linenum ] | [ | { begin |
exclude | include }
regular-expression ] ] *
Available in any view