3Com Switch 8800 Advanced Software V5 Configuration Guide

RMON Configuration Examples 1061
RMON Configuration
Examples
Network requirements
Agent is connected to a configuration terminal through its console port and to a
remote NMS across the Internet.
Create an entry in the RMON Ethernet statistics table to gather statistics on
GigabitEthernet 4/2/2, and logging is enabled after received bytes exceed the
specified threshold.
Network diagram
Figure 311 Network diagram for RMON
Configuration procedure
# Configure RMON to gather statistics for interface GigabitEthernet 4/2/2.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/2/2
[Sysname-GigabitEthernet4/2/2] rmon statistics 1 owner user1-rmon
[Sysname-GigabitEthernet4/2/2] quit
# Display RMON statistics for interface GigabitEthernet 4/2/2.
<Sysname> display rmon statistics GigabitEthernet 4/2/2
Statistics entry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet4/2/2<ifIndex.157>
etherStatsOctets : 0 , etherStatsPkts : 0
etherStatsBroadcastPkts : 0 , etherStatsMulticastPkts : 0
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Display RMON history
information and the latest
history sampling information
display rmon history [
interface-type
interface-number ]
Available in any view
Display RMON alarm
configuration information
display rmon alarm [
entry-number ]
Available in any view
Display RMON prialarm
configuration information
display rmon prialarm [
entry-number ]
Available in any view
Display RMON events
configuration information
display rmon event [
entry-number ]
Available in any view
Display RMON event log
information
display rmon eventlog [
event-number ]
Available in any view
To do... Use the command... Remarks
Internet
Terminal
Agent
NMS
Console
Server