3Com Switch 8800 Advanced Software V5 Configuration Guide

Information Center Overview 1119
n
Configurations for the seven output directions function independently and take
effect only after the information center is enabled.
Outputting system information by source module
The system is composed of a variety of protocol modules, module drivers, and
configuration modules. The information can be classified and filtered by source
module. Some module names and description are shown in
Table 44.
7 Not specified Not specified (Receives log,
trap, and debug information)
8 Not specified Not specified (Receives log,
trap, and debug information)
9 channel9 Log file (Receives log, trap,
and debug information)
Table 43 Information channels and output directions
Information channel
number Default channel name Default output direction
Tab le 44 Module name list
Module name Description
8021X 802.1X module
ACL Access Control List module
ADBM MAC address management module
ARP Address Resolution Protocol module
BGP Border Gateway Protocol module
CFM Configuration File Management module
CLST Cluster Configuration module
CMD Command line module
COMMONSY Common System MIB module
default Default setting of all modules
DEV Device management module
DHCP Dynamic Host Configuration Protocol module
DIAGCLI Diagnosis module
DNS Domain Name System module
DRVMPLS Multiprotocol label switching driver module
DRVL2 Layer 2 driver module
DRVL3 Layer 3 driver module
DRVL3MC Layer 3 multicast module
MPLS Multiprotocol Label Switching module
DRVPOS POS driver module
DRVQACL QACL driver module
DRVVPLS Virtual Private LAN Service driver module
ETH Ethernet module
FTPS FTP Server module
GARP Generic Attribute Registration Protocol
module
HA High Availability module