3Com Switch 8800 Advanced Software V5 Configuration Guide

Configuring Information Center 1123
Configuring
Information Center
Setting to Output
System Information to
the Console
Setting to output system information to the console
To do... Use the command... Remarks
Enter system view system-view -
Enable information center info-center enable Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Configure the channel
through which system
information can be output to
the console
info-center console channel
{ channel-number |
channel-name }
Optional
System information is output
to the console by default,
with channel 0 as the default
channel.
Configure the information
source for an information
channel.
info-center source {
module-name | default }
channel { channel-number |
channel-name } [ debug {
level severity | state state } * |
log { level severity | state
state } * | trap { level severity
| state state } * ] *
Required
Refer to Table 45 for the
default output rules of system
information.
Configure the format of the
time stamp
info-center timestamp { log
| trap | debugging } { boot |
date | none }
Optional
The time stamp for log, trap
and debug information is
date by default.
Tab le 45 Default output rules for different output directions
Output
direction
Modules
allowed
LOG TRAP DEBUG
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Console default
(all
modules)
Enabled warnings Enabled debuggin
g
Enabled debuggin
g
Monitorin
g terminal
default
(all
modules)
Enabled warnings Enabled debuggin
g
Enabled debuggin
g
Log host default
(all
modules)
Enabled informati
onal
Enabled debuggin
g
Disabled debuggin
g
Trap
buffer
default
(all
modules)
Disabled informati
onal
Enabled warnings Disabled debuggin
g
Log buffer default
(all
modules)
Enabled warnings Disabled debuggin
g
Disabled debuggin
g
SNMP
NMS
default
(all
modules)
Disabled debuggin
g
Enabled warnings Disabled debuggin
g