3Com Switch 8800 Advanced Software V5 Configuration Guide

Configuring Information Center 1125
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to
enable the associated display function in order to display the output information
on the monitor terminal.
Follow these steps to enable the display of system information on a monitor
terminal:
Setting to Output
System Information to a
Log Host
Configure the information
source for an information
channel
info-center source {
module-name | default }
channel { channel-number |
channel-name } [ debug {
level severity | state state } * |
log { level severity | state
state } * | trap { level severity
| state state } * ] *
Required
Configure the format of the
time stamp
info-center timestamp { log
| trap | debugging } { boot |
date | none }
Optional
By default, the time stamp for
log, trap and debug
information is date.
To do... Use the command... Remarks
Enable the monitoring of
system information on a
monitor terminal
terminal monitor Required
Enabled on the console
disabled on the monitoring
terminal by default.
Enable the display of debug
information on a monitor
terminal
terminal debugging Required
Disabled by default
Enable the display of log
information on a monitor
terminal
terminal logging Optional
Enabled by default
Enable the display of trap
information on a monitor
terminal
terminal trapping Optional
Enabled by default
To do... Use the command... Remarks
To do... Use the command... Remarks
Enter system view system-view -
Enable information center info-center enable Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 43 for default
channel names.
Specify a log host and
configure the parameters
when system information is
output to the log host
info-center loghost host-ip [
channel { channel-number |
channel-name } ] [ facility
local-number | language {
chinese | english } ] *
Required
Disabled by default with
channel 2 as the default
channel when enabled.