3Com Switch 8800 Advanced Software V5 Configuration Guide

Configuring Information Center 1127
Setting to Output
System Information to
the SNMP NMS
n
To ensure that system information can be output to the SNMP NMS, you need to
make the necessary configurations on the SNMP agent and the NMS. For detailed
information on SNMP, refer to
“SNMP Configuration” on page 1049.
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 43 for default
channel names.
Configure the channel
through which system
information can be output to
the log buffer and specify the
buffer size
info-center logbuffer [
channel { channel-number |
channel-name } | size
buffersize ] *
Optional
System information is output
to the log buffer by default
with channel 4 (known as
logbuffer) as the default
channel and a default buffer
size of 512.
Configure the information
source for an information
channel
info-center source {
module-name | default }
channel { channel-number |
channel-name } [ debug {
level severity | state state } * |
log { level severity | state
state } * | trap { level severity
| state state } * ] *
Required
Configure the format of the
timestamp
info-center timestamp { log
| trap | debugging } { boot |
date | none }
Optional
The time stamp for log, trap
and debug information is
date by default.
To do... Use the command... Remarks
To do... Use the command... Remarks
Enter system view system-view -
Enable information center info-center enable Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 43 for default
channel names.
Configure the channel
through which system
information can be output to
the SNMP NMS
info-center snmp channel {
channel-number |
channel-name }
Optional
System information is output
to the SNMP NMS by default
with channel 5 (known as
snmpagent) as the default
channel.
Configure the information
source for an information
channel
info-center source {
module-name | default }
channel { channel-number |
channel-name } [ debug {
level severity | state state } * |
log { level severity | state
state } * | trap { level severity
| state state } * ] *
Required
Configure the format of the
timestamp
info-center timestamp { log
| trap | debugging } { boot |
date | none }
Optional
The time stamp for log, trap
and debug information is
date by default.