3Com Switch 8800 Advanced Software V5 Configuration Guide

Displaying and Maintaining VLAN 163
c
CAUTION:
■ You cannot configure both dsap-id and ssap-id as 0xE0 or 0xFF; otherwise the
matching packets will take the same encapsulation format as that of the ipx llc
packets and the ipx raw packets respectively.
■ When you use the mode keyword to configure a user-defined protocol
template, do not set the etype-id argument for ethernetii packets to 0x0800,
0x86DD, 0x809B, or 0x8137; otherwise, the matching packets will take the
same format as that of the IPv4, IPv6, IPX, and AppleTalk packets respectively.
Displaying and
Maintaining VLAN
VLAN Configuration
Examples
Port-Based VLAN
Configuration Example
Network requirements
■ Switch A connects to Switch B through Trunk port Ethernet 1/1/1;
Enter Ethernet
interface view or
port group view
Enter Ethernet
interface view
interface interface-type
interface-number
Use either command.
Under Ethernet interface
view, the subsequent
configurations only apply
to the current port; under
port group view, the
subsequent configurations
apply to all ports in the
port group.
Enter port group
view
port-group { manual
port-group-name |
aggregation agg-id }
Configure the port link type as
Hybrid
port link-type hybrid Required
Allow specified VLANs to pass
through the current Hybrid port
port hybrid vlan
vlan-id-list { tagged |
untagged }
Required
Configure the association between
the Hybrid port and the
protocol-based VLAN
port hybrid
protocol-vlan vlan
vlan-id { protocol-index [
to protocol-end ] | all }
Required
To do... Use the command... Remarks
To do... Use the command... Remarks
Display VLAN information display vlan [ vlan-id1 [ to
vlan-id2 ] | all | static |
dynamic | reserved ]
Available in any view
Display VLAN interface
information
display interface
vlan-interface [
vlan-interface-id ]
Available in any view
Display information about the
protocol-based VLAN
configured on the specified
VLANs
display protocol-vlan vlan {
vlan-id [ to vlan-id ] | all }
Available in any view
Display the protocol
information and protocol
indexes configured on the
specified interfaces
display protocol-vlan
interface { interface-type
interface-number [ to
interface-type
interface-number ] | all }
Available in any view