3Com Switch 8800 Advanced Software V5 Configuration Guide

VLAN Configuration Examples 165

Network diagram

Figure 47 Network diagram for protocol-based VLAN configuration

Configuration procedure

# Create VLAN 2 and VLAN 6 and configure them as protocol-based VLANs.

<Sysname> system-view

[Sysname] vlan 2

[Sysname-vlan2] protocol-vlan ipv4

[Sysname-vlan2] quit

[Sysname] vlan 6

[Sysname-vlan6] protocol-vlan ipv6

[Sysname-vlan6] quit

# Configure Ethernet 1/1/1 and Ethernet 1/1/2 as Hybrid ports which permit

packets of VLAN 2 and VLAN 6 to pass, and associate Ethernet 1/1/1 with the

protocol-based VLANs.

[Sysname] interface ethernet 1/1/1

[Sysname-Ethernet1/1/1] port link-type hybrid

[Sysname-Ethernet1/1/1] port hybrid vlan 2 6 tagged

[Sysname-Ethernet1/1/1] port hybrid protocol-vlan vlan 2 all

[Sysname-Ethernet1/1/1] port hybrid protocol-vlan vlan 6 all

[Sysname-Ethernet1/1/1] quit

[Sysname] interface ethernet 1/1/2

[Sysname-Ethernet1/1/2] port link-type hybrid

[Sysname-Ethernet1/1/2] port hybrid vlan 2 6 tagged

Eth1 /1/1

Switch A

Host A

Switch B

IP network

Host B

Eth 1