3Com Switch 8800 Advanced Software V5 Configuration Guide

Configuring a Routing Policy 249
Define match criteria
for IPv4 routes
Match IPv4 routes having
destinations specified in
the ACL
if-match acl
acl-number
Optional
Not configured by
default
Match IPv4 routes having
destinations specified in
the IP prefix list
if-match ip-prefix
ip-prefix-name
Match IPv4 routes having
next hops or sources
specified in the ACL or IP
prefix list
if-match ip {
next-hop |
route-source } { acl
acl-number |
ip-prefix
ip-prefix-name }
Optional
Not configured by
default
Match IPv6 routes having the next hop or source
specified in the ACL or IP prefix list
if-match ipv6 {
address | next-hop
| route-source } {
acl acl-number |
prefix-list
ipv6-prefix-name }
Optional
Not configured by
default
Match routes having AS path attributes specified
in the AS path ACL(s)
if-match as-path
as-path-number&<1
-16>
Optional
Not configured by
default
Match routes having community attributes in the
specified community list(s)
if-match
community {
basic-community-list
-number [
whole-match ] |
adv-community-list-
number }&<1-16>
Optional
Not configured by
default
Match routes having the specified cost if-match cost value Optional
Not configured by
default
Match BGP routes having extended attributes
contained in the extended community list(s)
if-match
extcommunity
ext-comm-list-numb
er&<1-16>
Optional
Not configured by
default
Match routes having specified outbound
interface(s)
if-match interface
{ interface-type
interface-number
}&<1-16>
Optional
Not configured by
default
Match routes having MPLS label if-match
mpls-label
Optional
Not configured by
default
Match routes having the specified route type if-match
route-type {
internal |
external-type1 |
external-type2 |
external-type1or2
| is-is-level-1 |
is-is-level-2 |
nssa-external-type
1 |
nssa-external-type
2 |
nssa-external-type
1or2 } *
Optional
Not configured by
default
To do...
Use the
command... Remarks