3Com Switch 8800 Advanced Software V5 Configuration Guide

2
BASIC CONFIGURATIONS
While performing basic configurations of the system, go to these sections for
information you are interested in:
■ “Basic Configurations” on page 27
■ “CLI Features” on page 33
Basic Configurations This section covers the following topics:
■ “Entering/Exiting System View” on page 27
■ “Configuring the Device Name” on page 27
■ “Configuring the System Clock” on page 27
■ “Configuring a Banner” on page 28
■ “Configuring CLI Hotkeys” on page 29
■ “Configuring User Levels and Command Levels” on page 30
■ “Displaying and Maintaining Basic Configurations” on page 32
Entering/Exiting System
View
n
With the quit command, you can return to the previous view. You can execute the
return command or press the hot key <Ctrl+Z> to return to user view.
Configuring the Device
Name
Configuring the System
Clock
To do... Use the command... Remarks
Enter system view from user
view
system-view -
Return to user view from
system view
quit -
To do... Use the command... Remarks
Enter system view system-view -
Configure the device name sysname sysname Optional
The default device name is
3Com.
To do... Use the command... Remarks
Set the standard time clock datetime time date Optional
Set the time zone clock timezone zone-name {
add | minus } time
Optional