3Com Switch 8800 Advanced Software V5 Configuration Guide

298 CHAPTER 29: IPV6 RIPNG CONFIGURATION
# Configure Switch C.
[SwitchC] ripng 1
[SwitchC-ripng-1] quit
[SwitchC] interface Vlan-interface 101
[SwitchC-Vlan-interface101] ripng 1 enable
[SwitchC-Vlan-interface101] quit
[SwitchC] interface Vlan-interface 300
[SwitchC-Vlan-interface300] ripng 1 enable
[SwitchC-Vlan-interface300] quit
[SwitchC] interface Vlan-interface 400
[SwitchC-Vlan-interface400] ripng 1 enable
[SwitchC-Vlan-interface400] quit
# Display the routing table of Switch B.
[SwitchB] display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::F54C:0:9FDB:1 on Vlan-interface101
Dest 2::/64,
via FE80::F54C:0:9FDB:1, cost 1, tag 0, A, 3 Sec
Dest 3::/64,
via FE80::F54C:0:9FDB:1, cost 1, tag 0, A, 3 Sec
Peer FE80::D472:0:3C23:1 on Vlan-interface100
Dest 1::/64,
via FE80::D472:0:3C23:1, cost 1, tag 0, A, 4 Sec
# Display the routing table of Switch A.
[SwitchA] display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::476:0:3624:1 on Vlan-interface100
Dest 2::/64,
via FE80::476:0:3624:1, cost 2, tag 0, A, 21 Sec
Dest 3::/64,
via FE80::476:0:3624:1, cost 2, tag 0, A, 21 Sec
3 Configure Switch B to filter incoming routes.
[SwitchB] acl ipv6 number 2000
[SwitchB-acl6-basic-2000] rule deny source 3::/64
[SwitchB-acl6-basic-2000] rule permit
[SwitchB-acl6-basic-2000] quit
[SwitchB] ripng 1
[SwitchB-ripng-1] filter-policy 2000 import
# Display routing tables of Switch B and Switch A.
[SwitchB] display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::F54C:0:9FDB:1 on Vlan-interface101
Dest 2::/64,