3Com Switch 8800 Advanced Software V5 Configuration Guide

Basic Configurations 31
n
The commands available depend on your user level when you log onto a device.
For example, if your user level is 3 and the command level of VTY 0 interface is 1,
you can use commands below level 3 (inclusive).
c
CAUTION:
■ When you configure the password for switching user level with the super
password command, the user level is defaulted to 3 if no user level is
specified.
■ You can switch to a lower user level unconditionally. To switch to a higher user
level, however, you need to enter the password needed (The password can be
set with the super password command.). If the entered password is incorrect
or no password is configured, the switch fails. Therefore, before switching to a
higher user level, you should configure the password needed.
■ You are recommended to use the default user level; otherwise the change of
user level may bring inconvenience to your maintenance and operation.
To do... Use the command... Remarks
Switch the user level super [ level ] Optional
Enter system view system-view -
Configure the password for
switching the user level
super password [ level
user-level ] { simple | cipher }
password
Optional
By default, no password is
needed for switching the user
level.
Configure the command level
in system view
command-privilege level
level view view command
Optional