3Com Switch 8800 Advanced Software V5 Configuration Guide

336 CHAPTER 30: OSPF CONFIGURATION
Configuring OSPF
Network Management
To Configure OSPF network management, use the following commands:
Enabling the
Advertisement and
Reception of Opaque
LSAs
With this feature enabled, the OSPF router can receive and advertise the Type 9,
Type 10 and Type 11 opaque LSAs.
To enable the advertisement and reception of opaque LSAs, use the following
commands:
To do... Use the command... Remarks
Enter system view system-view -
Bind OSPF MIB to an
OSPF process
ospf mib-binding process-id Optional
The first OSPF process
bound with OSPF MIB by
default
Enable OSPF trap snmp-agent trap enable ospf [
process-id ] [ ifauthfail | ifcfgerror |
ifrxbadpkt | ifstatechange |
iftxretransmit |
lsdbapproachoverflow | lsdboverflow
| maxagelsa | nbrstatechange |
originatelsa | vifcfgerror | virifauthfail
| virifrxbadpkt | virifstatechange |
viriftxretransmit | virnbrstatechange ]
*
Optional
Enabled by default
Enter OSPF view ospf [ process-id | router-id router-id |
vpn-instance instance-name ]*
-
Enable messages
logging
enable log [ config | error | state ] Optional
Not enabled by default
Enable the logging on
neighbor state
changes
log-peer-change Optional
Enabled by default
To do... Use the command... Remarks
Enter system view system-view -
Enter OSPF view ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
-
Enable the
advertisement and
reception of opaque
LSAs
opaque-capability enable Optional
Disabled by default