3Com Switch 8800 Advanced Software V5 Configuration Guide

458 CHAPTER 35: BGP CONFIGURATION
3 Configure BGP community
# Configure a routing policy
[SwitchA] route-policy comm_policy permit node 0
[SwitchA-route-policy] apply community no-export
[SwitchA-route-policy] quit
# Apply the routing policy
[SwitchA] bgp 10
[SwitchA-bgp] peer 200.1.2.2 route-policy comm_policy export
[SwitchA-bgp] peer 200.1.2.2 advertise-community
# Display the routing table on SwitchB.
[SwitchB] display bgp routing-table 9.1.1.0
BGP local router ID : 2.2.2.2
Local AS number : 20
Paths: 1 available, 1 best
BGP routing table entry information of 9.1.1.0/24:
From : 200.1.2.1 (1.1.1.1)
Original nexthop: 200.1.2.1
Community : No-Export
AS-path : 10
Origin : igp
Attribute value : MED 0, pref-val 0, pre 255
State : valid, external, best,
Not advertised to any peers yet
The route 9.1.1.0/24 is not available in the routing table of SwitchC.
BGP Confederation
Configuration
Network requirements
To reduce IBGP connections in AS 200, split it into three sub ASs, ASwitch 7750
Family1, ASwitch 7750 Family2 and ASwitch 7750 Family3. Switches in ASwitch
7750 Family1 are fully meshed.