3Com Switch 8800 Advanced Software V5 Configuration Guide

Controlling Route Distribution and Reception 473
Configuring Description
for a Peer/Peer Group
To configure description for a peer/peer group, use the following commands:
n
The peer group for which to configure a description must have been created.
Disabling Session
Establishment to a
Peer/Peer Group
To disable session establishment to a peer/peer group, use the following
commands:
Logging Session State
and Event Information
of a Peer/Peer Group
To log the session and event information of a peer/peer group, use the following
commands:
n
Refer to the Switch 8800 Command Reference Guide for information about the
log-peer-change command.
Controlling Route
Distribution and
Reception
The task includes routing information filtering, routing policy application and route
dampening.
Prerequisites Before configuring this task, you have:
■ Enabled the IPv6 function
■ Configured the IPv6 BGP basic functions
To do... Use the command... Remarks
Enter system view system-view -
Enter BGP view bgp as-number Required
Enter IPv6 address family view ipv6-family -
Configure description for a
peer/peer group
peer { ipv6-group-name |
ipv6-address } description
description-text
Optional
Not configured by default
To do... Use the command... Remarks
Enter system view system-view -
Enter BGP view bgp as-number Required
Enter IPv6 address family view ipv6-family -
Disable session establishment
to a peer/peer group
peer { ipv6-group-name |
ipv6-address } ignore
Optional
Not disabled by default
To do... Use the command... Remarks
Enter system view system-view -
Enter BGP view bgp as-number Required
Enable global logging log-peer-change Optional
Enabled by default
Enter IPv6 address family view ipv6-family -
Enable to log session and
event information of a
peer/peer group
peer { ipv6-group-name |
ipv6-address } log-change
Optional
Enabled by default