3Com Switch 8800 Advanced Software V5 Configuration Guide

50 CHAPTER 4: USER INTERFACE CONFIGURATION
Follow these steps to configure authentication mode at login as scheme:
n
For the detailed description of the local-user and password commands, refer to
“AAA, RADIUS and HWTACACS Configuration” on page 879.
Sending Messages to
the Specified User
Interface(s)
n
You cannot use this command to release the connection that a user is using.
Releasing the
Connection
Established on the
User Interface(s)
Displaying and
Maintaining User
Interface(s)
Set local authentication
password
set authentication
password { cipher | simple }
password
Required
No local authentication
password is set by default.
To do... Use the command... Remarks
Enter system view system-view --
Enter user interface view user-interface { first-num1 [
last-num1 ] | { aux | console |
vty } first-num2 [ last-num2 ] }
--
Set authentication mode at
login to scheme
authentication-mode
scheme [
command-authorization ]
Required
By default, the authentication
mode is password for VTY
and AUX user interfaces and
is none for Console interface.
Set authentication username
and enter local user view
local-user user-name Required
No local user is set on the
device by default.
Set authentication password password { cipher | simple }
password
Required
To do... Use the command... Remarks
To do... Use the command... Remarks
Send messages to the specified
user interface(s)
send { all | num1 | { aux |
console | vty } num2 }
Required
To do... Use the command... Remarks
Release the connection
established on the specified
user interface(s)
free user-interface { num1 | {
aux | console | vty } num2 }
Required
To do... Use the command... Remarks
Display the information on the
use of the user interface(s)
display users [ all ] Available in any view
Display the information about
the specified or all user
interface(s)
display user-interface [
num1 | { aux | console | vty }
num2 ] [ summary ]
Available in any view