3Com Switch 8800 Advanced Software V5 Configuration Guide

IPv6 PIM Configuration Examples 703
Use the display pim ipv6 interface command to view the IPv6 PIM configuration
and running status on each interface. For example:
# View the IPv6 PIM information on all interfaces of Switch B.
[SwitchB] display pim ipv6 interface
Vpn-instance: public net
Interface NbrCnt HelloInt DR-Pri DR-Address
Vlan-interface101 1 30 1 FE80::A01:10E:1
(local)
Vlan-interface200 0 30 1 FE80::200:AFF:F
E01:10E (local)
Vlan-interface103 1 30 1 FE80::9D62:0:FD
C5:2
To view the BSR election information and the locally configured C-RP information
in effect on a switch, use the display pim ipv6 bsr-info command. For example:
# View the BSR information and the locally configured C-RP information in effect
on Switch B.
[SwitchB] display pim ipv6 bsr-info
Vpn-instance: public net
Elected BSR Address: 2004::2
Priority: 0
Hash mask length: 126
State: Accept Preferred
Uptime: 00:04:22
Next BSR message scheduled at: 00:01:46
# View the BSR information and the locally configured C-RP information in effect
on Switch D.
[SwitchD] display pim ipv6 bsr-info
Vpn-instance: public net
Elected BSR Address: 2004::2
Priority: 0
Hash mask length: 126
State: Elected
Uptime: 00:01:10
Next BSR message scheduled at: 00:00:48
Candidate BSR Address: 2004::2
Priority: 0
Hash mask length: 126
State: Elected
Candidate RP: 2004::2(Vlan-interface 103)
Priority: 0
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
To view the RP information discovered on a switch, use the display pim ipv6
rp-info command. For example:
# View the RP information on Switch B.