3Com Switch 8800 Advanced Software V5 Configuration Guide

DNS Configuration Example 757
Network diagram
Figure 226 Network diagram for dynamic domain name resolution
Configuration procedure
n
■ Before performing the following configuration, make sure that there is a route
between the device and the host, and configurations are done on both the
device and the host. For the IP addresses of the interfaces, see
Figure 226.
■ This configuration may vary with different DNS servers. The following
configuration is performed on Windows 2000 server.
1 Configure DNS server
# Enter DNS server configuration page.
Select Start > Programs > Administrative Tools > DNS.
# Create zone com.
In Figure 227, right click Forward Lookup Zones, select New zone, and then
follow the instructions to create a new zone com.
2.1.1.2/16
2.1.1.1/16
DNS server
Device
DNS client
1.1.1.1/16
3.1.1 .1/16
host.com
IP network
Host