3Com Switch 8800 Advanced Software V5 Configuration Guide

800 CHAPTER 55: GR CONFIGURATION

<SysnameB> system-view

[SysnameB] acl number 2000

[SysnameB-acl-basic-2000] rule 10 permit source 192.1.1.1 0.0.0.0

[SysnameB-acl-basic-2000] quit

[SysnameB] interface vlan-interface 100

[SysnameB-Vlan-interface100] ip address 192.1.2.1 255.255.255.0

[SysnameB-Vlan-interface100] ospf dr-priority 0

[SysnameB-Vlan-interface100] quit

[SysnameB] router id 2.2.2.2

[SysnameB] ospf 100

[SysnameB-ospf-100] enable link-local-signaling

[SysnameB-ospf-100] enable out-of-band-resynchronization

[SysnameB-ospf-100] graceful-restart

[SysnameB-ospf-100] area 0

[SysnameB-ospf-100-area-0.0.0.0] network 192.1.2.0 0.0.0.255

3 Configure Switch C.

<SysnameC> system-view

[SysnameC] acl number 2000

[SysnameC-acl-basic-2000] rule 10 permit source 192.1.1.1 0.0.0.0

[SysnameC-acl-basic-2000] quit

[SysnameC] interface vlan-interface 100

[SysnameC-Vlan-interface100] ip address 192.1.3.1 255.255.255.0

[SysnameC-Vlan-interface100] ospf dr-priority 2

[SysnameC-Vlan-interface100] quit

[SysnameC] router id 3.3.3.3

[SysnameC] ospf process 100

[SysnameC-ospf-100] enable link-local-signaling

[SysnameC-ospf-100] enable out-of-band-resynchronization

[SysnameC-ospf-100] graceful-restart

[SysnameC-ospf-100] area 0

[SysnameC-ospf-100-area-0.0.0.0] network 192.1.3.0 0.0.0.255