3Com Switch 8800 Advanced Software V5 Configuration Guide

59
FLOW TEMPLATE CONFIGURATION
This chapter covers these topics:
■ “Configuring a Flow Template” on page 821
■ “Displaying and Maintaining Flow Templates” on page 824
■ “Flow Template Configuration Examples” on page 824
Configuring a Flow
Temp lat e
Follow these steps to create a flow template and apply it to an interface:
To do... Use the command... Remarks
Enter system view system-view --
Create a flow
template
Create a basic flow
template
flow-template
flow-template-name
basic { customer-vlan-id
| dip | dipv6 | dmac |
dport | dscp |
ethernet-protocol |
fragments | icmp-code |
icmp-type |
icmpv6-code |
icmpv6-type |
ip-precdence |
ip-protocol | ipv6-dscp |
ipv6-fragment |
ipv6-protocol |
service-cos |
service-vlan-id | sip |
sipv6 | smac | sport |
tcp-flag | tos } *
Optional
Use either command.
Create an extended
flow template
flow-template
flow-template-name
extend { ipv4
offset-max-value
length-max-value | ipv6
offset-max-value
length-max-value | l2
offset-max-value
length-max-value | l4
offset-max-value
length-max-value | l5
offset-max-value
length-max-value } *
Enter interface
view or port
group view
Enter interface view interface interface-type
interface-number
Required
Enter port group
view
port-group {
aggregation agg-id |
manual
port-group-name }