3Com Switch 8800 Advanced Software V5 Configuration Guide

864 CHAPTER 66: AGGREGATION CAR CONFIGURATION
n
■ For the description on the default value of CBS, refer to the Switch 8800
Command Reference Guide.
■ If the ports to which aggregation CAR is applied are not in the same chip, the
aggregation CAR is effective for only the ports in the same chip.
Configuration Examples Specify the aggregation CAR aggcar-1 to adopt the following CAR parameters:
CIR is 200, CBS is 2,000, and red packets are dropped.
Reference aggregation CAR aggcar-1 in traffic behavior be1.
The configuration procedure is as follows:
<Sysname> system-view
[Sysname] qos car aggcar-1 aggregative cir 200 cbs 2000 red discard
[Sysname] traffic behavior be1
[Sysname-behavior-be1] car name aggcar-1
Display the information
about the configured
traffic behavior
display traffic behavior
user-defined [ behavior-name ]
Optional
Available in any view
Display the CAR
configuration
information and
statistics information
about the specified
aggregation CAR
display qos car name [ car-name ]
Operation Command Description