3Com Switch 8800 Advanced Software V5 Configuration Guide

69
OUTBOUND TRAFFIC STATISTICS
CONFIGURATION
When configuring traffic classification and traffic shaping, go to these sections for
information you are interested in:
■ “Outbound Traffic Statistics Overview” on page 871
■ “Configuring Outbound Traffic Statistics” on page 871
■ “Displaying and Maintaining Outbound Traffic Statistics” on page 871
Outbound Traffic
Statistics Overview
A Switch 8800 provides two counters for each module to collect statistics on the
outbound traffic. You can specify the traffic type for each counter. The traffic type
can be all the outbound traffic of the module or the outbound traffic of the
combination of the elements (including interface, VLAN, local precedence and
drop precedence) on a module.
You can enable the two counters at the same time to collect statistics on the same
type of traffic or different types of traffic.
Configuring
Outbound Traffic
Statistics
Follow these steps to configure outbound traffic statistics:
n
For the outbound traffic statistics function configured on 3C17526 D-type
modules, the monitored object of the counter cannot be an interface.
Displaying and
Maintaining
Outbound Traffic
Statistics
Follow these steps to display and maintain outbound traffic statistics:
To do... Use the command... Remarks
Enter system view system-view -
Enable the
outbound traffic
statistics function
and specify the
type of outbound
traffic
qos traffic-counter outbound { counter0 |
counter1 } slot slot-num [ interface
interface-type interface-number ] [ vlan vlan-id ]
[ local-precedence lp-value ] [ drop-priority
dp-value ]
By default, the
outbound traffic
statistics function is
disabled.
To do... Use the command... Remarks
Display the
outbound traffic
statistics
information
display qos traffic-counter
outbound { counter0 | counter1 }
slot slot-num
Available in any view