3Com Switch 8800 Advanced Software V5 Configuration Guide

Configuring 802.1x 927
Note that:
Enable 802.1x globally dot1x Required
Disabled by default
Enable 802.1x for one or
more ports
dot1x interface interface-list Required
Disabled for any port by
default
interface interface-type
interface-number
dot1x
Set the port access control
mode for specified or all ports
dot1x port-control {
authorized-force | auto |
unauthorized-force } [
interface interface-list ]
Optional
auto by default
Set the port access control
method for specified or all
ports
dot1x port-method {
macbased | portbased } [
interface interface-list ]
Optional
macbased by default
Enable detection and control
of users logging in through
proxies globally
dot1x supp-proxy-check {
logoff | trap }
Optional
Disabled by default
Set the maximum number of
users to be supported
simultaneously for specified or
all ports
dot1x max-user
user-number [ interface
interface-list ]
Optional
1024 by default
Set the 802.1x authentication
method
dot1x
authentication-method {
chap | eap | pap }
Optional
CHAP by default
Set the maximum number of
attempts to send an
authentication request to a
supplicant
dot1x retry max-retry-value Optional
2 by default
Set timers dot1x timer {
handshake-period
handshake-period-value |
quiet-period
quiet-period-value |
server-timeout
server-timeout-value |
supp-timeout
supp-timeout-value |
tx-period tx-period-value }
Optional
The defaults are as follows:
15 seconds for the handshake
timer,
60 seconds for the quiet
timer,
30 seconds for the username
request timeout timer,
30 seconds for the supplicant
timeout timer, and
100 seconds for the server
timeout timer.
Enable the quiet-period timer dot1x quiet-period Optional
Disabled by default
Enter Ethernet interface view interface interface-type
interface-number
-
Enable detection and control
of users logging in through
proxies for the port
dot1x supp-proxy-check {
logoff | trap }
Optional
Disabled by default
Enable online user handshake dot1x handshake Optional
Enabled by default
To do... Use the command... Remarks