3Com Switch 8800 Advanced Software V5 Configuration Guide

940 CHAPTER 72: CONFIGURING SSH VERSION 2.0
Introduction to SSH
Configuration Tasks
Configuring the SSH
Server
Enabling SSH Server Follow these steps to enable SSH server:
Configuring the Protocol
Support for a User
Interface
After enabling the SSH server, you must configure the protocol support for the
involved interface(s). Note that the configuration takes effect at the next login.
Follow these steps to configure the protocols for the current user interface to
support:
Tabl e 40 List of SSH configuration tasks
Configuration tasks Remarks
Configuring
the SSH server
Enabling SSH server Required
Configuring the protocol
support for a user interface
Required
Creating/Destroying/Exporting
RSA Keys
Required
Configuring authentication
mode for SSH user
Optional
Configuring service type for
SSH users
Optional
Setting the SSH Management
Parameters
Optional
Configuring RSA public key
for the client
Required for the SSH users that use the RSA
authentication mode
Assigning RSA public keys to
SSH users
Required for the SSH users that use the RSA
authentication mode
Configuring the SSH client Optional
Configuring the device as an SSH client Optional
To do... Use the command... Remarks
Enter system view system-view -
Enable the SSH server
function
ssh server enable Required
Disabled by default
To do... Use the command... Remarks
Enter system view system-view -
Enter single-user interface
view or multi-user interface
view
user-interface [
type-keyword ] number [
ending-number ]
Required
Set the login authentication
method
authentication-mode
scheme [
command-authorization ]
Required
Specify the protocols for the
user interfaces to support
protocol inbound { all | pad
| ssh | telnet }
Optional
All protocols are supported by
default.