3Com Switch 8800 Advanced Software V5 Configuration Guide

978 CHAPTER 74: PASSWORD CONTROL CONFIGURATION
Setting a Local User
Password in Interactive
Mode
Follow these steps to set the password for a local user in interactive mode:
Displaying and
Maintaining Password
Control
n
The reset password-control history-record command can delete the history
password records of one or all users even when the password history function is
disabled.
Password Control
Configuration
Example
Network requirements
The following password control functions are required:
■ A user is prohibited from logging in after two successive login failures; the
password aging time is 30 days.
■ A super password must contain at least three types of the valid characters and
the valid characters of each type must not be less than five.
■ The password of the local user named test must not be less than six characters
and must consist of at least two types of the valid characters, with at least five
characters of each type. The password aging time is 20 days.
Configuration procedure
# Enter system view.
Configure the password
composition policy for super
passwords
password-control super
composition type-number
policy-type [ type-length
type-length ]
Optional
By default, the minimum
number of password
composition types is 1 and
the minimum number of
characters of a password
composition type is 1 too.
To do... Use the command... Remarks
To do... Use the command... Remarks
Enter system view system-view -
Create a local user and enter
local user view
local-user user-name -
Set the password for the local
user
password Required
By default, no password is set
for a local user in interactive
mode
To do... Use the command... Remarks
Display password control
configuration information
display password-control [
super ]
Available in any view
Display information about
users blacklisted due to
authentication failure
display password-control
blacklist [ user-name name |
ip ip-address ]
Available in any view
Delete users from the blacklist reset password-control
blacklist [ user-name name ]
Available in user view
Clear history password
records
reset password-control
history-record [ user-name
name | super [ level level ] ]
Available in user view