Removing and Installing XENPAK Optics on ProCurve 10-GbE Modules 2005-06

Removing and Installing XENPAK Optics

Software Support for XENPAK Optics

Hewlett-Packard offers and supports only XENPAK optics that include an HP label (product number J8173A,

J8175A, or J8176A) for use with the ProCurve 10-GbE Modules. Use of other brands of optics or the use of HP-

labeled XENPAK optics in non-HP devices is not supported.

HP periodically updates the software and documentation for the HP ProCurve Routing Switch. For the latest

software and publications versions for your ProCurve routing switch products, visit the ProCurve website at:

http://www.procurve.com

Click on one of the following:

For the latest routing switch software, click on software updates

For the latest ProCurve routing switch publications, click on:

Technical support, then Product manuals

Laser

• Class 1 Laser Product

• Laser Klasse 1

• Complies with IEC 825-2:1993

• EN60950-2000

Disclaimer

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in

connection with the furnishing, performance or use of this material. The only warranties for HP products and services are set

forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as

constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Hewlett-

Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard.

A copy of the specific warranty terms applicable to your HP product and replacement parts can be obtained from your HP Sales

and Service Office or authorized dealer.

without notice.

June 2005

Printed in U.S.A.

HP Part Number

5991-2189