760wl 2004-03

Network Setup

Caution: Make sure the Integrated Access Manager is NOT connected to the network when

you reconfigure the uplink port. Until you reconfigure the option card port as the uplink port, it

functions as a downlink port; however, as soon as it is configured as the uplink port, the on-

board (default) uplink port becomes a downlink port. If either of these ports is connected to the

network while it is functioning as a downlink port, major network problems may occur.

To reconfigure the uplink port, enter the following commands:

set uplink <slot>/<port>

<slot>

is the slot in which the option card is installed, <port> is the port number. The port is

always port 1 for a single-port card.

If the Access Control Server does not get its IP address through DHCP, set the IP address.

set ip <ip-address> [netmask]

reboot

Step 7.

Connect the Access Control Server Network Uplink port to your network. Figure 3-3 in the next

section illustrates the connection of the default (on-board) Network Uplink port.

Step 8. Verify that you can access the Administrative Console from a browser running on a computer

system connected to your network by entering the IP address of the unit:

http://<ip address>

The Administrator Logon page should appear (see Figure 3-2).

Figure 3-2. Administrator Logon

Step 9.

Log on using the username and password you set in Step 4.

Step 10. You can now use the browser-based Administrative Console to complete the configuration of

other settings such as advanced network features, session logging, SNMP management, the

HTTP proxy feature, Wireless Data Privacy settings, and setting up authentication and access

policies for client network access. For example, see

Step 18 on page 3-13 in the

section“Configuration Using the Administrative Console” for information on setting the system

date, time and time zone.

See the HP ProCurve Secure Access 700wl Series Management and Configuration Guide for detailed

information on the features of the Administrative Console.

3-6 HP ProCurve Secure Access 700wl Series Installation and Getting Started Guide